{Chrysler 300} Re: 57 300C / Wire Terminals Needed

["'Warren Anderson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Follow-up.....

To all members that had interest in my electrical terminal issue for my heater harness.

I never found new terminals.  I did end up removing the 4 original W/E terminals, that's what I found stamped on them with a magnifying glass, see photos.  

I shed a little blood in the process, but I got them off the old wiring without Damaging them.  I then crimped and soldered them onto the new wires and locked them into the original connector body on the blower motor.

Thanks, again.

Cheers!

Warren Anderson   

---

From: Warren Anderson <warren.anderson1960@xxxxxxxxx>
Sent: Thursday, December 5, 2024 6:43 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: 57 300C / Wire Terminals Needed

 

Hello Group,

      I need a little help.  I'm building a new wire harness for my 300C.  I'm working on the wiring harness from the blower switch over to the blower motor.  The motor connection is made up of 1 x 4-pin plug housing which fits into the motor connection.

      I have 100s of electrical parts, but I do not have the terminals needed to retain the 4-pin plug housing.  I have attached a few photos of the terminals I need.  Notice the signal slot, once the terminal is inserted into the housing the very end of the terminal gets bent slightly to keep the terminal in the housing.  

If anybody has such terminals or knows where to source them, please let me know.  I'm looking for a hand full.

length = 120 mm

width = 7 mm

thickness = 1 mm

Best Regards,

Warren Anderson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CH2PR10MB3927EAA8EE7B1057FB792E31F0332%40CH2PR10MB3927.namprd10.prod.outlook.com.

Attachment: 20241207_121640.jpg
Description: 20241207_121640.jpg

Attachment: 20241207_132926.jpg
Description: 20241207_132926.jpg