Re: {Chrysler 300} 57 300C / Wire Terminals Needed

[dplotkin@xxxxxxxxxxxxxxxxxxx]

scroll down on that last email. There is nothing special about those terminals. 

-----Original Message-----
From: "Finsruskw@xxxxxxxxxxxxxxx" <finsruskw@xxxxxxxxxxxxxxx>
Sent: Thursday, December 5, 2024 2:09pm
To: "Ron Waters" <ronbo97@xxxxxxxxxxx>
Cc: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 57 300C / Wire Terminals Needed

Commonly known as "packard" terminals.

Any auto parts store should have them, both male and female, terminals that is.

---

From: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
To: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, December 5, 2024 9:31:12 AM
Subject: RE: {Chrysler 300} 57 300C / Wire Terminals Needed

You may try these folks:

www.repairconnector.com

 

Ron

 

From: 'Warren Anderson' via Chrysler 300 Club International
Sent: Thursday, December 05, 2024 9:44 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 57 300C / Wire Terminals Needed

 

Hello Group,

 

      I need a little help.  I'm building a new wire harness for my 300C.  I'm working on the wiring harness from the blower switch over to the blower motor.  The motor connection is made up of 1 x 4-pin plug housing which fits into the motor connection.

 

      I have 100s of electrical parts, but I do not have the terminals needed to retain the 4-pin plug housing.  I have attached a few photos of the terminals I need.  Notice the signal slot, once the terminal is inserted into the housing the very end of the terminal gets bent slightly to keep the terminal in the housing.  

 

If anybody has such terminals or knows where to source them, please let me know.  I'm looking for a hand full.

 

length = 120 mm

width = 7 mm

thickness = 1 mm

 

Best Regards,

 

Warren Anderson

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CH2PR10MB3927A8D1D0C04EC70A42F7C1F0302%40CH2PR10MB3927.namprd10.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/000601db472a%24b92415f0%242b6c41d0%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1420466776.39782586.1733425767562.JavaMail.zimbra%40windstream.net.

 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1733426354.489812274%40apps.rackspace.com.