| So while this probably isn’t helpful: here (as in “Hershey”) Librandi runs roughly $2500 per bumper (for one of our big skirted wrap-around 1 piece bumpers). I should add “assuming” it is a good core.
They’ve done a lot of work for me and I had one issue on my G convertible rear bumper and Todd rechromed it without a question. On Jan 16, 2025, at 3:59 PM, 'pffkllc@xxxxxxx' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
There is also a question of location. Shipping bumpers carries an additional cost which is not minimal. Unfortunately, the regulation where I am make chrome plating terribly expensive $1,200 per bumper for my Ks, and that is without any substantial repair. The prohibitive cost is tantamount to not having any plating facilities at all.
Pete Fitch On Thursday, January 16, 2025, 12:09 PM, 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
The plating thing is getting to be such a PITA, I would like to see the club put up a page with a list of platers recommended by club members with an approximate pricing for items
plated in the last couple of years. I think it would be helpful.
James
From: John
W Sager <cleanthegarageout2@xxxxxxxxx>
Sent: Thursday, January 16, 2025 06:46
To: John Grady <jkg@xxxxxxxxxxxxxxxxx>; Keith Langendorfer <keith_a_lang@xxxxxxxxx>
Cc: henry.schleimer@xxxxxxxxxxxxxxx; James Douglas <jdd@xxxxxxxxxx>; Bob Jasinski <rpjasin@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} bumper 300K
I've used Sandy's myself. They do good work at a decent price. They can be a bit slow, so keep that in mind.
Last year I got quote of $690 for straightening and replating a Studebaker Hawk bumper from this company in
Syracuse. Jamie Hyde is familiar with them and their work.
lets get some hard numbers on 300 bumper plating so we can get somewhere ?
If you are in no way at fault, I would claim on her insurance. That way it gets properly
assessed, no arguments with someone who is clueless, and you don’t pay any excess. Similar thing happened to me with body damage and bent chrome bumper. Because their repair shops couldn’t guarantee a repair with existing rust in the area concerned, they
didn’t want to do the repair and just gave me a cheque for the quote to repair. $600 was allowed for the bumper straightening and re-chrome. Instead, I picked up a good replacement for $100 and pocketed the difference. Didn’t need a new bar on a not so
new car. Also did a dodgy panel repair for $100 and kept the $2000 for that. I doubt I would have been able to force $2600 out of the person directly. That’s why I pay my insurance company to negotiate on my behalf. All in all, I was happy to make money
out of the exercise as compensation for someone backing into my parked car, but I would have been much angrier if it was our new car.
Henry
What I am seeing is as low as $700 to as high as $2500.
I guess I will tell the lady that $1000 is fine if she wants to pay it herself. If not
and we have to go the insurance route then it will be the actual cost, plus shipping plus labor and possible a rental car until it is done as this is my daily driver now as I have the 1947 Desoto off line.
What a PITA.
James
yes — what is the number that is “reasonable” . we need to find that fair guy and reward
him .
I hear good things about a guy in Tennessee , — my go to guy in Mn ( spectacular work)
has gone way up . I am Still there , but getting crazy . To me 2k up is getting crazy , 3500 up is extortion but unless we share numbers no one knows anything .
win win here if we handle this right .
James , my first drive around town in my 300C convert , a core plug blew out of head
spewing coolant snd steam , about 5000 feet from my home on way back , first drive . A friend in town saw me , spun around U turn “ love your car “ etc I am in a big big hurry have ~ 5 minutes to really big trouble . I turn corner onto my street fast ,
Edison co and cops blocking road(!) bucket truck
Had to stop quickly , friend piles into new bumper waving hello .
Cop puts hand up yelling about going fast , steam pouring out . Cant make this stress
level up in a very bad dream . In 40 years never saw road blocked they came in , during the ten minutes i was gone . Followed by big bump from the rear.
Did not buy lottery ticket that day , scratched C bumper —brand new plating gorgeous
- still on the car today , over $ cost for new one / plate another ( looking for core and plate )
Be sure guy doing your motor knows how to set the old Chrysler disc type core plugs
, cannot be gentle. Experts are NOT on that . Several times now . PIA , today’s experts never saw one till you came , despite acting cool about it .
Might put “ how to do that right ” on our site , or machine block / heads for brass
cup type
2) keep well intentioned friends off your tail at all times
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617190181A1BC4CF88A6B48B93192%40CY5PR19MB6171.namprd19.prod.outlook.com.
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit
https://groups.google.com/d/msgid/chrysler-300-club-international/3F2CBFBD-7AA7-4933-BD88-A197C25BA01D%40gradyresearch.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617170089FF740860339884A931A2%40CY5PR19MB6171.namprd19.prod.outlook.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1901883660.503977.1737061170170%40mail.yahoo.com.
<image001.png>
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/413B2786-99DB-48CA-9401-F8BC8FF0F836%40hallowellbrooks.com.
|
Back to the Home of the Forward Look Network
Archive Sitemap