Thanks Carl, I see it there now, 3-4 ohm. Bob -----Original Message----- From: Carl Bilter <cbilter@xxxxxxxxx> Sent: Tuesday, December 10, 2024 12:12 PM To: Bob Jasinski <rpjasin@xxxxxxxxxxx>; John Grady <jkg@xxxxxxxxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx Subject: Re[2]: {Chrysler 300} speakers Hi Bob, The speaker impedance is listed in the Photofact print - see the parts list, look under speaker, voice coil impedance listed as 3 to 4 ohms. Modern 4 ohms speakers work great with the stock radios. 8 ohm will work ok too, not play as loud but maybe less distortion. Modern speakers will sound much better than the original Mopar "deluxe" units. John and I wrote a page on the letter car radios here: https://www.chrysler300club.com/tech/radio/1.html Carl B. ------ Original Message ------ >From "'Bob Jasinski' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx> To "'John Grady'" <jkg@xxxxxxxxxxxxxxxxx>; "'chrysler 300 club'" <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Date 12/10/2024 12:08:01 PM Subject RE: {Chrysler 300} speakers >John, > >Can you shed some light on the speaker impedance of stock speakers in letter cars? I'm wondering specifically about the F & G, but in general if you can. I looked at the Sam's Photofact schematic for the 5 and 7 button radios and can find nothing indicating speaker impedance. As you know, many modern speakers are 4 ohm, would that place too much of a load on these old tube/transistor radios, or did they come with 4 Ohm speakers? > >Bob J > >-----Original Message----- >From: chrysler-300-club-international@xxxxxxxxxxxxxxxx ><chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of John >Grady >Sent: Tuesday, December 10, 2024 7:08 AM >To: chrysler 300 club ><chrysler-300-club-international@xxxxxxxxxxxxxxxx> >Subject: {Chrysler 300} speakers > >hi >coincidence but might help someone, restoring 300C convert front >speaker is not 4x10 ( the usual “ Other Size” from 6x9 ) but 5 x7 >while not installed yet , just bought DS -18 speakers ( Amazon) based >on reviews — 50$ for two , single center tweeter . Noticed 4x6 in same >ad has many mounting holes , 6x9 too . seem good value especially w >stock radio , at 50 W rms . Stock a wreck , tape on cone etc like 500 >sold , good way to find what works , just fyi . hope it fits — only 2.5 >deep . Sometimes big magnet on back is a problem in front jg > >-- >For archives go to >http://www.forwardlook.net/300-archive/search.htm#querylang >--- >You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. >To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. >To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/72054504-1292-4A62-A4EF-15E7A53586BE%40gradyresearch.com. > >-- >For archives go to >http://www.forwardlook.net/300-archive/search.htm#querylang >--- >You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. >To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. >To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/039001db4b2e%2474786e30%245d694a90%24%40comcast.net. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/03f801db4b5a%2403d0ff90%240b72feb0%24%40comcast.net.