As someone already mentioned, - there are big differences between one bias-ply tire and another. The "reproduction" bias-ply tires for musclecars are (IMHO) pure garbage. They ought to have "for show use only" molded right into the sidewall. No way were these tires that bad back in the 60s/70s. Another thing about the radial tire "issue" might be the rim width(?) - most of our "finned" cars came with rather narrow wheels (compared to what is in general use today anyway). Pretty sure that radial tires are more "sensitive" to having the proper rim width than bias-plys. It's possible that if you get a radial tire that is "tall" enough to be right, - that the wheel required/recommended for the tire will be wider than what you have on the car. Just a thought. I have had no problems whatsoever with radials on my 59, - but then I don't have 4 1/2" or 5" wide wheels either. Regards, DaveG. ----- Original Message ----- From: <Posti@xxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Monday, March 22, 2004 11:07 AM Subject: Re: [FWDLK] Radial vs Bias > I managed a tire store for a while, and was a tire/auto mechanic for several years in the late 1970s and early 1980s, when radial tires started taking off. > > At the time, we were told that older cars should run on bias ply tires, as the radial construction caused problems with handling on cars not designed for it. > > As for my personal experience, my 1959 Dodge had radials that looked wrong and handled poorly. A switch to WW bias ply solved both problems. In contrast, my small cars (1952 MG TD, and 1973 and 1978 MGBs) ride great on radials. I don't know if weight is an issue or not. > > Bob > 1959 Dodge >
|
Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of
their respective authors.
This site contains affiliate links for which we may be
compensated.