It could be a bent distributor shaft or a flat lobe on the points cam, watch
the points as you turn the engine over by hand and see if the points open in
the position that is giving you the problem.
John
----- Original Message -----
From: edward petrus <[email protected]>
To: <[email protected]>
Sent: Friday, June 04, 1999 3:14 PM
Subject: [FWDLK] ignition troubles
> Any guesses from the group? I have no spark at one of the terminals of my
> distributor cap. Obviously, I've tried replacing the cap with a new one,
> with the same result, at the same position on the cap. New points,
> condenser, rotor, too. The wires aren't the problem since I'm checking
the
> spark at the cap, ahead of them and the plugs. I'm stumped.
>
> Any guesses? Thanks!
>
> Ed
|
|
Back to the Home of the Forward Look Network