1966 Imperial tires question/Vogue Tires

[RandalPark@xxxxxxx]

So it sounds like if we are going to use the original wheels, and not plan to 
adjust the ride hieght, 235/75R15 is the size to get, right?

Paul

In a message dated 9/1/2004 8:44:34 PM Eastern Daylight Time, "David Whitney" 
<david.whitney@xxxxxxxxxxxx> writes:

>
>
>
>
>
>
>>I may be wrong, but shouldn't a '66 Imperial have 235/75R15 tires?
>
>235/75R15 is the closest radial in diameter to stock bias ply tires. �You
>can play around with other wheel sizes and go a few percentage points up or
>down from stock outside tire diameter, so a 70 will work. �As I pointed out
>in my message with the link, you need a different speedometer pinion gear
>for different diameters. �The other thing you should consider is adjusting
>the suspension for the change in ride height.
>
>-- David
>'91 K-Imperial driver (14-inch radials)
>'66 Crown Coupe project (gonna get 15-inch BFG bias ply)
>'66 Newport 383 4bbl .030 over Eddys/Hurst/Cragars dual exhaust daughter's
>first Mopar (drag slicks, hee hee hee)
>
>
>
>
>
>
>
>----------------- �http://www.imperialclub.com �-----------------
>This message was sent to you by the Imperial Mailing List. Please 
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm