I have posted to the IML about my experiences with this many times. For me it has been the only way to go. Some of my cars sit for long periods of time. In this area, moisture in the system is common and highly destructive. I now run all of my cars, even daily drivers on DOT 5. The 10 + years that I wasn't able to run my Imperials chiefly was due to brake problems. Now that is no longer an issue. Some people have complained of spongey pedal with DOT 5. This has not been my experience. In fact all of my cars have better brakes now, than they ever did with other fluid. That could be due to my replacing the entire system on all cars. I have heard that this is no longer necessary to make the conversion, and that all you need to do is flush the system completely with DOT 5 until all fluid bleeds purple. I have not done this, so I can't say. They use to recommend all new parts, so that is what I have done. So far, so good! Paul In an email dated Tue, 11 May 2004 5:47:00 pm GMT, "Christopher Middlebrook" <delamothe@xxxxxxxxxx> writes: > > >Hello fellow Imperialists, > >I was wondering if any of you out there has used silicone based brake fluid in >your brake overhaul projects. > >Any wisdom, comments, etc. is greatly appreciated. > >Also, I appreciate any warnings, background, pitfalls, etc. from any of you >fellow members who turn a wrench on the 61-63 models as far as the brakes are >concerned. > >Thank you in advance > >Chris Middlebrook >62 custom southampton > > > >_______________________________________________ >Join Excite! - http://www.excite.com >The most personalized portal on the Web! > > >----------------- �http://www.imperialclub.com �----------------- >This message was sent to you by the Imperial Mailing List. Please >reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be >shared with everyone. Private messages (and attachments) for the >Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx >To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > >