> My solution was to install 3 metal plates sandwiched
> between 4 carburator gaskets, thus creating a
> miniature radiator under the carb.� During really
> hot
> (95 degree plus) days with the A/C on, the idle is
> still a little rough, but its much improved.
>
> Mike,
> What kind of metal did you use and what was the
> thickness of each layer
> please? I am assuming the gasket material you are
Actually, the whole thing came as a kit from MR
Gasket. 4 gaskets and 3 aluminum plates, each plate
was about 1 mm thick. And it did indeed make a marked
decrease in hot weather hot engine fuel vaporization,
thus improving idle. a 1/2" thick phenolic spacer
would have been better, perhaps, but all the ones I
saw were 1" or more- too thick for the limited
underhood clearances.
=====
--Mike Pittinaro
Piles of pitted chrome
Hubcaps along the floorboard
My junkyard-bedroom
__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
Back to the Home of the Forward Look Network