|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: mike myhrvold
Email: [email protected]
Remote Name: 65.170.1.137
Date: December 30, 2003
Time: 08:55:36
This may sound dumb, but have you checked the u-joints for play? Most people check u-joints for looseness, not tightness. If when the u-joints were pressed in, too much pressure was used, the end of the drive shaft could be bent slightly or the caps are on too tight and the joint has no play. That wiil cause vibration just like a frozen u-joint or a loose u-joint.
