|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: dick whelan
Email: [email protected]
Remote Name: 64.12.96.103
Date: July 22, 2002
Time: 21:44:25
3M makes a rubber shrink tubing that doesn't require any heat to shrink down to size. I applied some GE black RTV tothe cable after cleaning it thoroughly with laquer thinner and slid the heat shrink all the way down to the end fitting just to the point it wouldn't interfere with the groove for the cable clamp. I added a pinch type hose clamp at the end for good measure.You should find the 3M shrink tube at any wholesale electrical supply. I've run 2 months and 750 miles and it dry as a bone! Dick
