|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Tim
Email: [email protected]
Remote Name: 68.44.117.94
Date: January 25, 2004
I should have mentioned this is in a 57 firesweep with a 392. The bigger motor in the smaller car makes for a tight fit. I had gotten the kit with the dual resevoir master cylinder but just kept the old one on because of clearance issues. The front brakes have been hanging up ever since i installed them, despite my best effort. The 4-wheel drums did not hang up with the old master cylinder, which would lead me to beleive that it is working properly. Back brakes work fine, and there is a proportioning valve. I'll work on it and let everyone know if the dual resevoir solves the problem or not, although I'm sure it will. It was included in the kit for a reason i guess? Thanks for the help!
