|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Chris
Email: [email protected]
Remote Name: 68.168.150.15
Date: January 15, 2004
You shouldnt have to much trouble, I put a 392 into my 57 dodge with almost no modifications. I ended up having to flip the tranny mount around and i had to have the driveshaft shortened. I used the stock motor mounts, the 57 dodge torqueflight, i didnt have any fan/radiator clearance problems. The clearance between the distributor and the heater box was tight but it never caused any problems.
