|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Bob Bush
Email: [email protected]
Remote Name: 216.237.93.123
Date: December 12, 2003
I took the spark plug wire cover off of the valve cover, and that now allows appox. 1/8 inch clearance to the valve cover. The wire, top cap retainer, hits the bottom of the accordion style booster and lacks approx. 1/4 inch to clear. There is plenty of clearance toward the fender well side. The Hemi is just so darn wide and tall that there isn't much room. Has anyone ever used the original single chamber M/C on a front disc brake setup in a car equipped with the Hemi???? I am concerned that the original M/C would not displace enough fluid to properly activate the caliper pistons and the rear wheel cylinders at the same time. Thanks Bob
