|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Adam
Email: [email protected]
Remote Name: 66.188.144.190
Date: October 22, 2003
I think this must have been the problem (don't know how it happened though). I needed the car drivable again so I put the booster and MC back on last night. After bleeding the MC quickly, sure enough, the brakes worked just like they should! There were some rust flakes in the stuff that came out of the bleeder, but I'm not 100% sure if they were actually inside the cylinder since the brake fluid I collected from the bleeder went down the side of the rusty MC first. Either way, it's fixed now, so that saved me a lot of time and money :)
