|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Marty Stewart
Email: [email protected]
Remote Name: 68.147.25.224
Date: October 11, 2003
I have been looking through my Canadian parts book and I am not sure you can convert a Canadian Poly to a Hemi like you can for a U.S. Poly. I think the Canadian block is different. Unfortunetly although my book shows the balancer it doesn't list the part numbers. It looks like you would need a balancer, a balancer hub and a balancer key as a minimium. Maybe Bill W. can shed more light but it doesn't look promising at this point. The parts I have been able to check that I thought should at least be the same, have different part numbers, Can to U.S.
