|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: chuck lowe
Email: [email protected]
Remote Name: 64.12.96.202
Date: September 14, 2003
that wasn't a smart thing to do---JUST KIDDING---breaking a bolt or shaft while seperating it from a nut is more common than you may think no matter what the size---after you soak with penetrating oil(i prefer AEROKROIL)---you need to clean threads with a wire brush---as you are removing nut you should go back and forth with it to chase the threads as you go---now your part problem!---keyword MOPAR MEL---go into his site and get a feel of what this guy is all about---i would say there is about a 99% chance he can fix you up with a used part---hope i helped---chuck lowe
