|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Kevin O'Hara
Email: [email protected]
Remote Name: 216.174.1.210
Date: August 23, 2003
Don If your 61 is the same as my 58 which I think it is you can take a standard GM window crank tool and narrow the inner most part of the tool by smacking it lightly with a hammer against anvil or other hard surface then bend these newly shaped tabs slightly 1/16th of a inch towards you (when using the tool)and just push in behind the crank and wiggle the handle.Kevin
