|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Allen Malanowski
Email: [email protected]
Remote Name: 159.87.92.155
Date: August 18, 2003
Could be the rubber on the motor mounts is shot- before my engine (277 with mech lifters 4 barrel 56 plymouth) was rebuilt it shook the front end at the right engine speed. Of course the bent rods and paper shimmed bearings had a bit to do with why it was shaking- then the thumping noise started and I knew it was major rebuild time- no getting by with just a valve job- $1800 later- runs smooth.
