|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Neil Vedder
Email: [email protected]
Remote Name: 209.240.198.63
Date: August 04, 2003
Arthur, I overlooked mentioning that the EASIEST part, of this whole operation is "your" using a hand drill, to drill-out the rivets, to separate the pot-metal section, of the vent assy, from the stainless steel section (which cannot be "chromed")---once you CONFIRM that a mechanical shop is equipped/ready to re-rivet-together that assy, after it's rechromed. Neil
