|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Joey M
Email: [email protected]
Remote Name: 65.106.45.126
Date: July 31, 2003
Howdy, I had a similar problem on my '58 Chrysler windsor. I ended up tearing the brakes down. On mine the anchor was rusted in place so I ended up having to soak the plate in penetrating oil and tapped it with a screwdriver and hammer until it freed up. I also endedup replacing the wheel cylinders shortly after, but the anchors were was was hanging it up. Give a lookie and good look. --Joey M
