|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Eric
Email: [email protected]
Remote Name: 65.173.75.99
Date: July 27, 2003
I have a 58 savoy and I converted it over to a 354 Hemi, and now a 4 speed out of a b-body. Now my problem when the pressure plate and clutch are installed without the tranny in it works fine. Clutch is smooth when mashed but when the tranny is installed it is very hard to push the clutch in! Does any-one have any suggestions? I tried a different pressure plate but it didn't help!Thanks for any info!
