|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Tim
Email: [email protected]
Remote Name: 68.44.108.51
Date: July 12, 2003
I've found the 392 mounts are needing to be about 2 inches forwards, and raised up about 2 inches, so the pan will clear the frame. I will probably use some rectanuglar tube steel to relocate it just that little bit. Does anyone know where i can get mounts, and not just the rubber bits? I'll need the metal "cans" as well, unless i can find an alternative.
