|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: John Z
Email: [email protected]
Remote Name: 68.115.14.12
Date: April 20, 2003
Jason - Jack up rear end of car and support it sufficiently with jackstands. Accelerate up to 60/70. If vibration is still there you can rule out front end. Then remove drive shaft and check the large nut that secures the hand brake drum. It might be loose. My 59 was doing same thing yours is and I discovered that nut was loose. After tightening it vibration went away.
