|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Digger Dave
Email: [email protected]
Remote Name: 206.63.254.41
Date: January 17, 2003
Time: 14:09:35
Richard- Jim is right as far as I know. However, be careful which manifold you are looking for. The 350, 361 383 & 400 are B Blocks and any manifold from one of these engines will fit. The manifold from a 413, 426, 440 (or some 1959 383s) will not, as they are an RB Block, with the decks raised 3/4". Head to manifold geometry is changed and they will be too tight. You only need be concerned with this if you are looking for any manifold to fit the B Block. If you are looking for a correct year (1958) only one from a 350 or 361 will work.
