|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Bob O.
Email: [email protected]
Remote Name: 198.145.10.94
Date: January 11, 2003
Time: 22:40:19
Milt.... I sent you a page from the factory manual with pictures, didn't you get it? That WAS from an iron TF. Unless you've got a Powerflite, in which case no round wheel on the base of the cable, but otherwise exactly the same removal procedure. Remove the NSS and push in a long thin screwdriver whilst pulling on the cable, having previously removed the bracket. It'll drain down to the correcect level once the NSS is out! 8-))
