|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Gary Christensen
Email: [email protected]
Remote Name: 66.140.233.165
Date: January 03, 2003
Time: 22:29:25
I have a 57 Belvedere upon which a previous owner installed the 2x4 manifold on the 301 V-8. The coil is mounted on a bracket that is spot welded to the passenger side valve cover just behind the middle valve cover bolt. Also, there is a picture in Hot Rod Magazine, May, 1957 issue, that shows the coil in that same location. The magazine picture is of a new 57 Fury being tested by the magazine(along with a Belvedere sport coupe). There isn't much space behind the rear carburetor for a coil.
