|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Adam Green
Email: [email protected]
Remote Name: 195.92.67.72
Date: November 03, 2002
Hmmm, Well, the 383 is a giveaway but like I said in the earlier post and Hank reiterated, there was a 383 in both low and raised block. If you can take one of the heads off and measure the bore and stroke, then you will know for sure. I would GUESS that it's the RB 383 due to the placement of the stamping pad but you don't want a guess. Are there any more numbers on the pad? There should be.
