|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Larry Acton
Email: [email protected]
Remote Name: 198.208.223.35
Date: October 23, 2002
Yes, that could be a 318 Poly motor. I believe that 1958 was the only year for a factory dual four barrel setup for the 318. There was a dual four aluminum setup offered after market, but has long since been discontinued. I have a '65 coronet 500 with a poly and a cast iron dual four barrel setup. It runs pretty good, but could use a good cam and headers.
