|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Mike Patterson
Email: [email protected]
Remote Name: 216.39.176.89
Date: October 11, 2002
Another possibility (if you can find one) is the Weiand Drag Star type intake. These were made as 2 halves, one bolting to each head, and two 1" diamater fuel resistant hoses connecting the 2 halves (to balance out the fuel mixture I believe). The down side is they were made for a lot of Carbs either 6 or 8 2BBLs.
