|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: [email protected]
Remote Name: 192.75.238.204
Date: September 19, 2002
Lee.....Do you have enough drum thickness that you could turn and SLEEVE the drum and then have it turned/ground back to nomina? THis might be the best way to go, if it works. Make sure that when you do this, that you give yourself about 0.002/0.003 thousands interference, and then heat the sleeve and dry-ice chill the drum before pressing together to get a really tight fit.
