|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Daven Anderson
Email: [email protected]
Date: February 21, 2002
http://www.moparmusclemagazine.com/ To stroke the engine to 4" as they did,you can use the Mopar Performance 4" stroker crank and change your trans. to a '62-64 pushbutton A-727, or have a custom 4" stroke billet crank made with the pre-'62 8-bolt flange to be compatible with the original A-413 'cast iron' Torqueflite (or pre-62 manual trans. bellhousings).
