|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Mark
Email: [email protected]
Date: March 26, 2001
Terry, I converted my '58 Dodge to P/S in 1992. Along with the column, you will need the pump with correct brackets for your engine, crankshaft pulley with groove for P/S belt, hoses from pump to column, different Pitman arm for column (man. and p/s are different). You can reuse your steering wheel but the horn contact plate is different and you will need the one from p/s. Also splice the wiring harness from the new column into the old harness so the horn and turn signals will work.
It's not too hard a conversion if you have all the parts and it will make your Plymouth drive like a dream compared to manual steering! Good luck, Mark
