|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: brandon
email: [email protected]
Date: July 25, 2000
Time: 20:09:20
i used a 66 dodge coronet b body 8.75...i had to slot the pads about a 1/2" out...bolted right up...except the pinion angle was way up...put 1.5" angled lowering blocks in to correct this..could also change pads or add wedges to correct this... the reason for changing was to get away from the 2 pc axles and rivited drums...major pain to fix...also brakes are easier to find for this rearend... let me know...brandon
