|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Adam Lindenbaum
email: [email protected]
Date: May 30, 2000
Time: 20:15:21
Never should a Chevy engine enter a Mopar.Use a 440 if you want speed,its a bolt in w/your 350 mounts.(for the newer trans the crossmember needs a little mod.)Use a 383 or 400 and your 2X4 intake will work,for push buttons use a 62-65 trans(the 65 has a slip yoke )
