{Chrysler 300} 1957 Thompson Power Steering Pump Rectangular seal ring needed

["'Warren Anderson' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello Folks,

I have a parts call-out

I'm in need of the rectangular ring located between the oil reservoir housing and the pump body housing.  It is approximately 5" in O.D. and is 3/16" thick.  I only need the ring, but will buy the whole kit if need.  Please let me know where to buy.

Thanks in advance,

Warren Anderson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/SN6PR01MB529554C4311914099D134487F0122%40SN6PR01MB5295.prod.exchangelabs.com.