{Chrysler 300} 1962 Core Support Removal

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

What all MUST come out in order for me to remove the Radiator Core Support?

(So I can glide in the Engine/Trans more easily)

- Do I need to remove that bottom pan?  I know there are 4 bolts that screw from the front of the pan face into the core support

- I need to remove the A/C parts & pieces that are bolted to the core support & travel over the top of it

- Do I need to remove the Battery Tray entirely; or just separate it from the face of the core support?

- Suspect I need to remove the vertical piece that the hood latch partially attaches to

- Wiring on the drivers side that travels through the core support

- All side bolts holding core support to fenders (inner & outer)

Am I missing anything?

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/8FACEA13-A2C1-4FD3-8301-596E58D877BE%40yahoo.com.